Orners corner
Home About Contact

Heathkit foot standoffs

Having lost two of the tapered foot extensions from my old Heathkit SB-102 power supply I decided to 3D print a replacement. These foot extenders are used to raise the front of the radios to slope the front display. The hardware needed to make a complete set are a Keystone Electronics #728 rubber bumper and a 1 1/2" 6-32 round head slotted screw (or philips if you're not doing a full-on restoration). The STEP and STL files are linked below for printing your own, or you can contact me if you need a few printed for a small fee.

Heathkit Foot STL file   Heathkit Foot STEP file